June 5th, 2007
Tax programming on the Sharp ER-A530 is pretty easy. Here ya go.
- Turn the MA Key to the PGM 2
- Enter 2711
- Press the Decimal Button
- Press the @/FOR Button
- Press 1 for tax rate 1, 2 for tax rate 2, 3 for tax rate 3, 4 for tax rate 4
- Press the @/FOR Button
- Enter Tax Rate as 00.000 (use the decimal key)
- Press the @/FOR Button
- Enter the lowest taxable amount Example is everything over $0.01 taxable enter 1, or does tax kick in a $0.10 then you would enter 10. (most tax districts I have seen tax starts at $0.01)
- Press the CA/AT (Cash) Button
- Turn key to Reg and test.
Posted in Programming, Sharp Cash Registers | 2 Comments »
May 22nd, 2007
We get a large amount of questions about importing UPC codes into a cash register. The answer is yes, but of course it is not as easy as that. You must have the following conditions:
- A commercial grade cash register with a serial (rs232 port) available
- A polling package like PC POLL
- A source for your UPC codes
The set up to accomplish this is not cheap but is is not out of sight either. A decent machine to do this with at least 2500 UPC codes will cost you about $600.00 plus a scanner etc. The software will cost about $660.00, plus all the needed cables etc.
PC Poll is the only package I have found that will import and export UPC codes in a csv or excel file. The packages from SAM do not import. Don’t know why, but they don’t!
Posted in General Cash Register Questions | No Comments »
April 11th, 2007
What happens when your power fails. Well with most cash registers, nothing happens (at that point). Cash Registers are ROM based and designed to store the current transaction you were working on when the power failed. When the power supply is restored the cash register will probably be right back to the spot the power fail happened.
However there are some major problems that often occur when the power fails. Cash Registers come with rechargeable batteries that store your program and sales data when power fails. That is a great feature, as long as the battery is good. Register batteries are often only good for 3 to 5 years (some less) so when you have a brief power failure you will loose everything in the register. If you have a bad battery it will do you no good to re-program the register until the battery is replaced. Most cash register batteries, are not the typical AA battery, but rather soldered in units. You could expect a charge of $200.00 to $500.00 for a battery replacment depending on your make and model and if you take the machine in or have a tech travel to you.
If you do have a power failure, unplug your cash register and do not plug ity back in until the power has been restored. This will keep the register from being damaged due to a spike in power (yes, I have seen them blown up).
And to wrap this up, when you store a cash register for more then a couple nights it should be plugged into power. It does not need to be turned on, just plugged in. We get calls every summer from people that say “It worked when we stored it last winter”, well now you know why it no longer works!
TCRG
Posted in General Cash Register Questions, Repair Issues | No Comments »
April 11th, 2007
We get a lot of request here for information on Sweda Cash Registers. I could be wrong but I think Sweda is long gone. If they are still around they are no longer the Cash Register Power House they were 25 years ago. Sorry if you were looking for help with programming or a part for a Sweda Cash Register. We have plenty of great cash registers for sale at The Cash Register Guys if you need a replacment
Posted in General Cash Register Questions | No Comments »
March 8th, 2007
I hear this from time to time “My Z report is wrong”. Well in years of doing this for a living I have seen wrong Z’s just a few times. Most often it is that you are reading the report wrong, or sometimes that a cashier is stealing from you.
One of the best places to start to figure your “Z” report out is to look in your manual for help. The manual in most cases will show you what every single line means. Here are some other tips
- Look at your “Z” counter. Is it counting by one? If not you have a theft problem (or you lost the last report). They always count by one.
- Make sure your tape reads “Z” on it, quite often people call me and report that the “Z” reports are adding together. Everytime it is because they are “X’ing” not “Z’ing”
- Make sure you are comparing daily reports to daily reports, not daily to monthly. Most monthly or “period to date” reports are known as “Z2″ where daily reports are known as “Z1″ reports. Most machines have both.
- Do not try to over complicate a “Z” report, you must balance to them, not make them balance to what you have in the drawer.
- IF YOU ARE SHORT IN THE TILL ON A REGULAR BASIS YOU ARE BEING STOLEN FROM!!!! IT IS NOT THE REGISTER ADDING WRONG!!!! Sorry to be harsh, but it is a huge problem. And so often it is from the employee that is “Like Family” “Been with us forever” etc etc.
TCRG
Posted in General Cash Register Questions, Reporting, Z reports | No Comments »
March 1st, 2007
I get a loy of questions regarding “Z” reports. Most electronic cash registers have many different “Z” reports available. All of them have 1 minimum or it would not really be a cash register.
The “Z” report is a report you request from the cash register when ever you want. Most users do this once a day, or maybe once per shift. The right “Z” tape will print your sales, taxes, cash, check, charge, discounts, voids, returns, and sometimes sales departments or groups. Take is the main report for knowing:
- How much cash and other media total you should have
- How much was taxable and how much was not
- How many voids, no-sale, discounts.
Now the reason for being called a “Z” report is simple. It is a Z for ZERO, which means it prints and then “Zero’s” that report. You can take two “Z” report back to back and the 2nd one will be all zeros (except for no-resettable total and counters).
Again there are most registers have many reports available that can all be “Z’d” but choose the one that makes the most sense for your needs. The average cash registers hourly report, or PLU report is useless when trying to close a day’s books and be accountable.
TCRG
Posted in General Cash Register Questions, Reporting, Z reports | No Comments »
February 27th, 2007
The Samsung ER-650 also known as the SAM4s ER-650 is a great mid level cash register. Heavy duty with a multi-line LCD display. You won’t find an Electronic Cash Register easier to use then this one. Optional Credit Card Interface, computer interface, and kitchen printer interface.
There are a few possible drawbacks that most often can be overcome with a little planning. One big factor with this machine is that it has only one printer. In most cases it will be used as the receipt not a journal. However the register does have an electronic journal. The other drawback is that the ER-650 has only 2 serial ports. Most cases that is fine, but keep in mind if you have a credit card interface and a kitchen printer the port are gone and you could not add more options like a scale or computer interface. And the big drawback is that the ER-650 CAN NOT sharp a kitchen printer or guest checks! It you need multiple registers and one printer this machine WILL NOT work. There is an aftermarket product that can do make the 650 do this but it is expensive. If that is something you require move up to a bigger register.
Overall a great investment, just make sure you think your needs though first.
Thanks TCRG
Posted in Samsung Cash Registers (SAM4s), Samsung ER-650 | No Comments »
February 27th, 2007
The Sharp Electronic Cash Register Model UP-700 is a high end restaurant Cash Register. Commercial Grade and very heavy duty. Features a thermal printer with both R/J. Multi-line LCD display makes using and programming very easy. Large flat micro-motion keyboard makes programming a breeze. Optional credit card interface, computer interface, kitchen printer interface, and more.
Questions please leave a comment. Can’t go wrong with this register.
Posted in Sharp Cash Registers | No Comments »
February 27th, 2007
The Sharp ER-A320 is a great commercial grade cash register. Features an impact drum printer using 44mm bond paper and an IR-90/91 Ink Roller.
If you have any questions or comments on this Sharp Electronic Cash Register Please leave a comment.
Thanks TCRG
Posted in Sharp Cash Registers | 28 Comments »
January 26th, 2007
In order to turn the receipt off on the Sharp ER-A450T you will need to:
- turn the key mode switch to the OP X/Z position
- Press the RCPT button.
To turn the receipt back on repeat the steps.
Also if you have the receipt turned off you can print a receipt on demand by pressing the RCPT key after finishing a transaction.
Posted in Programming, Sharp Cash Registers | No Comments »
